Northern Commander

What a pane shows

Each pane has its own view, order and filter, so two panes on one folder can show it two ways. The view and order are kept from one run to the next.

KeyAction
⌘F1View…
⌘F2Sort…
⇧⌘.Show or hide hidden files
⌥⌘FFilter by pattern…
⌘RRe-read

What this side shows

The ⌘F1 menu is two lists. The first is what the side you are on shows — Files, Tree, Info or Preview — with a dot beside the one it shows now. The second is the views of whatever that is, with a dot beside the one it is in. A key at a row’s right edge is one that does the same from the pane with the menu closed. A row names none where its own key would do something else there: the tree’s key puts the tree in the other pane’s place, and the row puts it on this side. The letter marked in a row’s name takes that row with ⌥ held, as in every menu.

What this side shows comes first, then the views of whatever that is.
  • Choosing one puts it on this side, in place of what is there. From a pane that means this pane is covered and the tree, the description or the preview is about the pane on the other side. The keys — ⌃T, ⌃L, ⌃Q — do it the other way round: they cover the other pane and are about this one.
  • Files gives the place back to the pane, as you left it. Closing a folder tree this way leaves the other pane where the tree led it.

Full, brief and thumbnails

⌘F1 chooses between them. The rows, their order and their marks are the same in each, and the cursor stays on its row. These are the views of a pane that lists things: while the keyboard is on the folder tree, the same menu offers the tree’s own.

A line per row, with its size, date and time — and its On disk and Private sizes when chosen in F10.

The full view: everything about each row, twenty rows at a time.

Names only, down a column then across — three columns unless you choose otherwise, so three times as many fit. ← and → move a column; the line under the list still has the cursor’s row in full.

The brief view: the whole folder at once.

Thumbnails

A grid of tiles, each a small picture with the name under it: a photo’s own picture, a preview of a document or a film, and the icon of its kind for anything else. Rows run across a line of tiles and on to the next.

The thumbnail view. The line under the list still has the cursor's row in full.
  • ← and → move a tile, running on to the next line at the end of one; ↑ and ↓ move a line. The page keys, Home and End work as in any listing.
  • Marking, typing to find a name and every command work as they do on a row. A marked tile has its name on a yellow band the width of the tile. Hold ⇧ with an arrow to mark every tile you pass.
  • The line under the list still has the cursor’s row in full.
  • Pictures are made as tiles come on screen, so you can move straight away. Until a tile’s picture arrives it shows a sheet with the file’s extension, or a folder.
  • A menu, a dialog or a notice opened over the tiles hides only the part of a picture it covers. The rest stays.

A folder’s name ends in / in every view, even when it is cut to fit, since the color alone does not say it is a folder.

A name too long for its column is cut in the middle, with a … where the rest was: IMG_…012.heic. Its start, the last three characters before the extension and the extension stay, so names that begin alike can still be told apart. Narrower still, those three characters go first, then the extension. The line under the list cuts a name the same way. Hold the mouse still on a name or a path with … in it, here or almost anywhere else in the application, and a box beside it shows all of it.

A folder given an emoji or a symbol in Finder, with Customize Folder, shows it at the end of its name. A symbol shows as a similar emoji where there is one, and otherwise not at all. Untick Folder emoji in view options to hide them.

View options

F10 lists what can be changed about the pane you are in, with how each stands now, and under a line what both panes share. The other pane’s are there once you switch to it. At the top of a side is its view, and under it a box that holds what belongs to that view and nothing else; choosing another view changes what is in the box. It is in the Left, Right and Options menus of the bar, and View options…, at the bottom of the view menu and the sort menu, opens it too.

The pane you are in. Nothing changes until OK or Apply.
  • Tab and ↓ go down the options, then what is under both panes; ← and → step a choice, and Space or ⌥↓ lists all of it.
  • A letter with ⌥ ticks or unticks a box, and only moves to a choice or a field, so letters can be pressed one after another. Home goes to the view, at the top.
  • Nothing changes until OK: Enter from any option, or ⌥O, here and in the view options of every other screen. Apply, ⌥Y, sets what you chose and keeps the dialog open. Esc and Cancel leave everything as it was since the last Apply, and ask first when something was chosen that OK would have changed: Keep choosing is the answer Enter gives.
  • A dot, •, before an option says you changed it and have not yet applied it.
  • While OK is gray, the line over the buttons says why, and so does the line under the field at fault: a pattern that cannot be read as a regular expression.
  • An option that could not be set is named in a notice afterwards, and so is how many marks went with rows a filter or hidden files now leave out.
  • Only the options of the view chosen are listed. A side lists only what means something for what it shows: a list of processes has no tiles and no folders to match. A column that is ticked and has no room at this width says no room now.
  • Most of what is set here is kept for next time. A star after an option says it is not remembered, as the line over the buttons says: it lasts while what it belongs to stays shown, and at the longest until the application quits. The filter has one, and so does the view while Usage is chosen: a pane comes back in the view it was in before.
  • The row you are on names its quick key at its right, where it has one: also ⌘F1.
View
Which view the pane uses. What is in the box under it is that view’s.
Columns
For the full view: which columns to show beside the name, in two columns — the sizes, Size, On disk and Private, then Date, Time and the rest. On disk and Private are off until you tick them. For the usage view: which of the sizes to show; the one it is in order by always shows. They are kept for each kind of listing: a pane of disks has columns of its own. In a folder on a disk, Tags writes the names of the Finder tags each file has, and Tag color draws a circle at the end of the name for each of its tags that has a color, up to three; both are off until you tick them. Folder emoji is on until you untick it.
Size bars
For the full view, under the sizes: a bar behind each size, as long as its share of the largest size listed, so the large things stand out without reading a number. A bar can end partway through a character’s width, so small sizes are told apart too. A folder with no size has none. It is offered while a column of sizes is ticked, since the bars are drawn behind them.
Names across
For the brief view: how many columns of names, from one to six.
Tiles
For the thumbnail view: small or large. A large tile is twice as wide and twice as tall.
Sort
The order, on one line: what to sort by, and ascending or descending. In the usage view, which size it is in order by, largest first: Size, On disk or Private.
Filter, Hide what matches, Match folders too
The filter, on one line: the pattern, and at its end whether it is read as a wildcard or a regular expression. An empty pattern takes it off, and the last two are listed once there is a pattern. A filter is always for now: it is never kept, with a folder or for next time.
This folder
Over a folder, whether it remembers its own view.
Both panes
Hidden files, the side you are in at full width, and how the width is divided between the panes. How dates and sizes are written is the whole application’s, and is in the settings.
Browsing together
While the panes browse together: whether the other pane’s cursor follows.

A pane that lists something with switches of its own has them on its side — the processes: which to sort by, a tree, the current user’s only, and holding the order. A side showing a tree has the tree’s options.

The same key works everywhere. In the viewer, the editor, every view of a file, the terminal (with ⌘ held, since the bare key is the program’s) and when synchronizing, F10 lists what can be changed about that view. Where there is nothing, it says so.

Size bars in the full view. A folder has one once something has measured it.

Finding what takes the space

⌃U puts the pane in the usage view, and the same key puts it back as it was. It is also a row of the view menu.

Largest first, each with its share of everything listed.
  • Every folder listed is measured without being asked, one after another. A folder still waiting shows … where its size will be, and the line at the bottom of the window says which is being counted. Esc stops the counting; ⌘R starts it again.
  • The largest row is first, files among the folders, and each row moves into place as its size arrives. The cursor stays on the row it was on.
  • It is in order by one of the three sizes — the length unless you choose On disk or Private in View options or the sort menu — and the bar, the share and the total are of that one.
  • The size it is in order by has a bar behind it, as long as its share of the largest row.
  • Share is how much of everything listed each row is. Total, under the list, is what it all comes to, with a > before it while something is still to be counted or could not all be read.
  • A link is listed last, in gray with what it leads to, and is in no share and no total: a folder reached through a link and where it really is counts once. What a link leads to is measured only where it is on the same disk and is not this folder or one above it; any other link keeps ►SYMLINK◄, so a link to the top of the disk never sets off a walk of all of it. A link to the top of a disk, to /Volumes or to the volumes of the startup disk is never measured, even when you ask.
  • Measuring never goes into another disk mounted inside a folder, such as a network share or a disk image. Listed as a row, such a disk shows ►MOUNTED◄, is in no share and no total, and is not measured, in this view, the tree’s or by Compute size; Get Info on it describes that disk. The system’s own disk of devices, /dev, is never measured.
  • A file with several names (a hard link) takes its room once in the total, and counts in Private once all its names are inside this folder, whichever rows they are in.
  • Hidden files and folders are counted whether or not they are shown. When they are not, one line under the rows says how many there are, what they come to and their share; the cursor does not go there. ⇧⌘. shows them as rows. Rows a filter leaves out are not counted.
  • Enter on a folder goes into it and carries on the same way. Sizes are kept while the application is open, so going down and coming back counts nothing twice.
  • Marking, copying, moving and deleting work as in any view: find the large thing, and F8 it there.
  • Get Info on a folder says all three of its sizes.
  • A pane left in the usage view comes back in the view it was in before, so nothing is counted as the application starts.

Clean up disk space — Clean up disk space in the Commands menu, and in the list of every action — puts the folder tree in the other pane’s place with the size of every folder in it, and this pane in the usage view beside it.

The order

⌘F2 sorts by name, extension, date, size, space on disk, private size, or not at all.

Choosing the order already in force turns it around.
Order Sorts by
Name The name, capitals and small letters together, numbers by their value (file2 before file10) and an accented letter next to the plain one
Extension What follows the last dot. A name starting with a dot, like .zshrc, has none
Date When it was last changed, newest first
Size Largest first
On disk The room each takes, largest first
Private What deleting each alone would free, largest first
Unsorted The order the disk gives them
  • Choose the order the pane is already in to reverse it. The heading’s arrow says which way it runs, ↑ for ascending and ↓ for descending, and so does the arrow in the menu. Unsorted has no way round: no arrow, and nothing to reverse.
  • Click a column heading to sort by that column, as choosing it in the menu does, and click the one the pane is sorted by to reverse it. Time sorts by date. A column nothing sorts by, like Folder in search results, does nothing, and so does a click on the headings of what is in the other pane’s place. In the usage view, a click on a column of sizes chooses the size it is in order by.
  • Folders stay above files, and .. stays first, whatever the order. The usage view has an order of its own, and the pane’s comes back when it is left.
  • On disk and Private are offered where the rows are files and folders.
  • Order names chooses how names are ordered, in both panes and the folder tree: as Finder does, or exactly, one character at a time, which puts file10 before file2.
  • Sorted by a column the pane is not showing, the name’s heading says so: Name by Size↓.

Hidden files

⇧⌘. shows or hides the files macOS hides — names starting with a dot, and files marked hidden — in both panes at once, in every folder. It is Show hidden files, on unless you turn it off.

A marked file that is hidden stops being marked, so nothing you cannot see is copied or deleted.

Showing only some rows

⌥⌘F narrows the pane to the names that match a pattern.

A filtered pane says so twice: after the Name heading, and under the list.
Name matches
The pattern. *.jpg;*.png matches either; what follows a | is left out — *.txt|notes* is text files but not the notes. Put a name containing ; or | in quotes. ⌥↓ lists the patterns used before.
Search with
wildcard, where * is any run of characters and ? any one, matched against the whole name — or regular expression, found anywhere in the name. Either way, capitals and small letters match each other.
Rows
show matching, or hide matching to leave them out instead.
Match directories too
Off, folders are always listed, so you can still go into them.
  • The filter stays as the pane moves to other folders, until Show all in the same dialog, or Clear the filter, under Filter in the Left or Right menu.
  • It is not kept after you quit, so a filter never makes files seem to have gone.
  • Click the pattern in the heading to change it.
  • A row the filter hides stops being marked.
  • It only changes what the pane lists. Copying a folder still copies everything in it.

Filter by tag…, under Filter in the same menus, lists the Finder tags in this folder and shows only the files with the one you pick. Folders stay listed.

Sizes and dates

  • A date is written as Date format says: your Mac’s region, or one of seven fixed forms such as 2026-09-17 or 17 Sep 2026. The time follows it.
  • A column of sizes is written one way all the way down, so a longer number is always a bigger file. It is to the byte, 12,884,901,888, when the largest fits and the names keep room; otherwise every size in it is rounded to one place, 12.9 GB, with the points lined up. Sizes can ask for one or the other always — exact gives up the time and date columns before it rounds anything.
  • Units count in thousands: KB, MB, GB, TB, as the disk’s own label does. The unit is brighter the larger it is — megabytes a little, gigabytes white, terabytes cyan — unless Color size units is off.
  • A size with a > before the number is at least that much: something inside could not be read. The mark stands in front so the last digits stay lined up with the rows around it.
  • The line under the list has the cursor’s row’s name in full first, then its size rounded, to the byte, and its date, as many of them as there is room for.
  • A narrow pane drops columns from the right — the time first, then the date, then the size — rather than squeeze them. The name is never dropped.
  • A folder has no size until something works it out. Marking it with Space does; so does Compute size from its menu, for folders marked some other way. The total grows under the list as it is counted, and Esc stops it.
  • A link is never followed and never counted. Its row is gray, and shows what it leads to with → before the size: a file’s length, or a folder’s size once that folder is measured — until then ►SYMLINK◄, as a link that leads nowhere does. It is left out of every total.
  • ⌘R reads the folder again. A folder usually does that by itself when something in it changes; this is for the times it cannot tell, such as some network disks. It also lets go of the folder sizes counted there, so they can be counted again.

Three sizes

A file has more than one honest size, and each has a column.

Size
Its length: what a copy moves, and what it would take on a disk that holds it whole.
On disk
The room it takes here. Far less than its length for a file kept by a cloud service and not downloaded, or a sparse file such as a virtual machine’s disk.
Private
What deleting it alone would free. A file copied by cloning shares its room with the original until either changes, so deleting one of the two frees little or nothing. A file with a second name frees nothing until both are gone, so each of its rows says none. A disk that keeps no such figure, such as a network disk, leaves it empty.

A folder has all three once it is measured, which reads each folder once for every size of every file in it. A folder’s Private is at least what deleting it would free: a file and its clone both inside it free their room together, and that is not added. On disk and Private are read only while one of them is shown, so a pane that shows neither pays nothing for them.

A home folder of cloud files can be thousands of gigabytes long and take a few hundred on disk; sorting the usage view by On disk shows what is really filling it.

A folder that remembers its own view

A folder can look its own way every time a pane shows it: its sort, its view and columns. In View options, under This folder, tick Remember this view for this folder, with the view showing as you want it. Also for subfolders opens under it. A filter is never kept with a folder: it is always for now. Hidden files are one setting for every folder.

  • The folders under it take the same view, unless you untick that or one of them keeps its own. The nearest one wins whole, and the heading says which folder’s view is showing.
  • The pane goes back to the view it had when it leaves. The kept view belongs to the folder and is never taken along.
  • A sort or a view key pressed there lasts until the pane leaves those folders, and the heading says the changes are temporary. To keep them, tick Remember the changes for this folder.
  • While the panes are compared, kept views wait, because the rows have to line up.
  • A folder you rename, move or copy in the application takes its view along; a copy gets the same view as the original.

Folder views…, in the Left and Right menus, lists every view remembered: go to the folder, change which folder a view is for, or remove it. They are kept by path, so a folder renamed outside the application needs its row changed there.

Kept between runs

Each pane’s place, view, order and view options are kept for next time, and so is whether hidden files are shown. Full width and filters are not.