File operations
Every change to the disk — copy, move, rename, delete, a new folder or file, permissions, dates. Each asks before it changes anything, the long ones run while you carry on, and all of them are written in the journal.
| Key | Action |
|---|---|
| F5 | Copy |
| F6 | Move |
| F2 | Rename |
| ⇧F2 | Bulk rename… |
| F7 | Make directory… |
| ⇧F7 | New file |
| ⌥F7 | Make symbolic link… |
| F8 | Delete |
| ⇧F8 | Delete permanently |
| ⌃A | Permissions… |
| Change dates… | Change dates… |
| ⇧⌘J | Journal |
What each acts on
- Copy, move, delete, permissions and dates act on the marked rows, or on the row under the cursor when nothing is marked.
- Copy and move go to the folder in the other pane, unless you type somewhere else.
- Rename is the row under the cursor, or every marked row.
- A new folder or file goes in the active pane’s folder.
- A link is made in the other pane’s folder, to each marked row or to the row under the cursor.
A key that cannot act on what is selected does nothing, and the key bar shows its cell gray or empty.
Copying and moving
F5 and F6 open the same dialog: what is going, where to, and a choice between the two, so a wrong key costs nothing. Enter starts it; Background starts it without the panel that watches it.
- Something already at the destination is asked about, one file at a time: overwrite it, skip it, keep both, or try again.
- Copying or moving into the folder it is already in, or into itself, is refused before anything is written — also when a link leads there by another path.
- A move within one disk renames, and is instant however much is moved. To another disk it copies, then removes the originals.
- Preview looks first and writes nothing: how much would go, how much room is left, and the files already there, with one answer for all of them.
- Dragging rows to the other pane or onto a folder asks the same question. Rows can be dragged out to Finder too, and files in from it.
Copying and moving has every field and answer.
Renaming
F2 asks for a new name for the row under the cursor, with the part before the extension selected — type, and the extension stays.
- A name that is taken is refused, with the reason under the field, rather than written over.
- With rows marked, F2 renames them all from a pattern — find and replace as a wildcard or a regular expression, a counter, the case — and lists every name before and after as you type. ⇧F2 does the same for one row.
Renaming has every field, and what the list says.
A new folder
F7 asks for a name and makes the folder in the active pane’s folder, with the cursor on it. It is offered in an empty folder too.
- ⌥↓ lists the last five names made this way.
- A name with
/in it,.or..is refused as you type. A name already taken, or a folder you may not write into, is refused when you press Create, with the reason under the field.
A new file
⇧F7 opens the editor on an empty file with no name, and asks nothing first. Nothing is written until you save: the first save asks for a name, and puts the file in the folder the pane was in when you pressed the key.
A link
⌥F7 makes a symbolic link to each marked row, or to the row under the cursor, in the folder the other pane is showing. It asks first: the name, for one link, and whether the link holds the whole path of what it points at (Absolute, the choice it opens on) or the way from the folder it is in (Relative). What the link will hold is shown as you choose.
- An absolute link keeps working when the link is moved; a relative one, when the link and what it points at are moved together.
- Links to several rows are named as the rows are. A name already taken in that folder is refused, with the reason under the field, before any link is made; nothing is ever written over.
- With one row and its name already taken there, the name opens with link added.
- The other pane has to show a folder on disk. An archive, the Trash and a list of found files do not take a link, and the key says so; nor can a link be made to what is inside an archive.
Deleting
F8 puts what is selected in the Trash. ⇧F8 removes it for good — and so does F8 pressed again at its question. Both ask first, and how hard depends on what you could lose: a file to the Trash is one Enter, a full folder for good needs the word delete typed. A disk with no Trash never turns a delete permanent without asking.
Deleting has what each asks, and why.
Permissions
⌃A sets who may read, write and run what is selected — a box for each, and the
same as an octal number. A box the selected items differ about shows [-] and leaves each as it is
unless you set it. For a folder it can go inside too, to the files, the folders or both.
Permissions has every box and choice.
Dates
Change dates… sets when what is selected says it was last written and last read. It has no key: it is Files › Info › Change dates… in the menu bar, in the menu on a row, and beside the dates in the info pane.
- Each is a date and a time, the date written the way dates are shown everywhere and the time to the minute or the second. Now beside each writes this moment in.
- A date left as the dialog opened it is not changed, so one can be set without the other.
- Where the selected items differ a field opens empty, and leaves each item as it is unless you type a date.
- A folder gets its own dates. Nothing inside it is touched.
- When it was made is shown and cannot be set.
- It is written down in the ⇧⌘J with the dates each item had before.
Tags
Tags…, in the Files menu, adds Finder tags to what is marked and takes them off, in Finder as
well. [x] is on all of them, [ ] on none, and [-] on some, which leaves each as it is until you
change it.
- The tags offered are Finder’s own list, each in its color. Color of under the list changes the color of the tag under the cursor, everywhere that tag is shown.
- A new tag is typed under New tag, with a color of its own beside it, and joins Finder’s list.
- Also tag everything inside, offered when a folder is marked, changes every file and folder in it too, at every depth. It is off until you tick it.
Splitting a big file
Split file into pieces…, in the Commands menu, cuts the file under the cursor into pieces of the size you say,
to fit a card or an upload limit. Sizes read as they do in Find files: 100M
and 4G count in 1000s, 700MiB in 1024s. The pieces go in the other pane’s folder and the file
stays as it is. If the disk plainly has too little room it asks first. Stopping, or running out of
room, leaves nothing behind.
The names of the pieces can be changed, with some of what a bulk rename reads: [N] is the file’s
name, [E] its extension and [C] the piece number, which every name has to have. As they start,
[N].[E].[C], they make movie.mp4.001, .002 and so on, which anything that can put files end to
end can put back. Where a name is already taken, one question covers the whole run: write over what
is there, give all the new pieces a free name, or stop.
Combine pieces into one file…, with the cursor on any piece, finds the rest in its folder by the number in their names, wherever in the name it is.
- If a number is missing it says which and does nothing, and it says if a piece is not the size the others are.
- It cannot know about pieces after the last one it finds, so it says how many it found, and warns when the last is as big as the others.
- The new file goes in the other pane’s folder under a name you can change, and the pieces stay as they are.
While it runs
A copy, move or delete runs while you carry on. A panel watches it — the whole, the file it is on, the rate and the time left — with Background, Pause and Stop. In the background, the line under the panes shows it, and a question it meets waits there for ⌘J.
While an operation runs has all of it, and what stopping leaves behind.
The journal
⇧⌘J lists everything changed on the disk since the application started, newest first, and whether each could still be undone. The journal has the rest.
Waiting for the disk
A copy, move, rename or delete is done when the disk has what it wrote, not just macOS: by default each waits for that once, at the end, so done means a card or drive is safe to pull out. How long each waits, and when a move removes its originals, are on Copying and moving in the settings.
More about file operations
- Copying and moving — the dialog, only the files that match, something already there, what cannot be done, what a copy carries, moving, dragging and pasting.
- Renaming — one name, and many at once from a pattern with every name listed before and after.
- Deleting — the Trash and for good, what each asks, and when the Trash will not take something.
- Permissions — the boxes and the octal number, items that differ, going inside folders, and links.
- While an operation runs — the panel, pausing and stopping, the background, questions held for later, work waiting its turn, and quitting.
- The journal — everything changed this run, step by step, and whether it could be undone.
- Synchronizing folders — two folders compared at every depth, a plan for each difference, and applying it.
- The clipboard — copying files and pasting them, and everything else on the clipboard.