Going places
Every way of sending a pane somewhere: a short list of places with a key each, a path typed and completed, where the pane has been, the folders you keep, the disks themselves, and a tree of folders to walk.
| Key | Action |
|---|---|
| ⌥F1 | Places for the left pane |
| ⌥F2 | Places for the right pane |
| ⌘G | Go to folder… |
| ⌘[ | Back |
| ⌘] | Forward |
| ⌥⌘[ | History |
| ⌘\ | Favorites |
| ⌘D | Add to favorites… |
| ⌘1 | Favorite 1 |
| ⌃T | Tree in the other pane |
The places list
⌥F1 opens the list for the left pane and ⌥F2 for the right, whichever is active. The pane you pick a place for becomes the active pane. To stay in the pane you were in, turn off Choosing a place makes its pane active on the Panes page of Settings.
| Rows | Their keys |
|---|---|
| The disk the Mac started from, then the others | /, then 1–9 |
| Home, Desktop, Downloads, Documents | ⌥H, ⌥D, ⌥L, ⌥O |
| Your favorites | ⌘1–⌘9, as over the panes |
| All volumes — the disks as a list | ⌥V |
| Clipboard — what was copied, as a pane | ⌥C |
| Trash — what was deleted, as a pane | ⌥R |
| Processes — what is running, as a pane | ⌥P |
| Listening ports — open ports and their processes | ⌥N |
| Launch agents — what starts by itself | ⌥G |
| Applications — what is installed | ⌥A |
| Same as other pane — where the other pane is | . |
| Saved searches — searches you kept | ⌥S |
| Collections — files you gathered | ⌥E |
| Terminal — the terminal in this pane’s place | ⌥T |
- A letter needs ⌥, the key you are already holding. Typing without it narrows the list to the rows whose names contain what you typed.
- It opens on the place nearest to where the pane already is.
- Press the same key again and it becomes Go to folder.
- A folder your Mac does not have is left out, rather than listed and refused.
The list grows with every disk and favorite, so the rows you use most can stay on top: ⌘Enter on a row opens a menu about it, to pin it there or give it a keyboard shortcut that goes to that place from the panes.
Typing a path
⌘G asks for a path, starting from where the pane is, already selected — so what you type replaces it, and an arrow key first keeps it to edit.
- The folders that fit are offered as you type: the rest of the best one in gray, and all of them listed under the field, even when there is only one. → takes the gray part, and ↓ goes into the list — as in every field that takes a path.
- ⌥↓ or
[ ↺ ]opens the folders you have gone to this way before, most recent first. - ⌘O or
[ … ]opens the picker, to walk to the folder instead of typing it. ~is your home folder.- A path that is not there is found out by trying to go: the reason appears under the field, and the pane stays where it was.
Your folders
| Key | Action |
|---|---|
| ⇧⌘H | Home |
| ⇧⌘D | Desktop |
| ⇧⌘O | Documents |
| ⌥⌘L | Downloads |
The same keys as in Finder.
Back, forward and history
Each pane keeps where it has been, most recent first — the last 50 places, each once, kept from one run to the next.
- ⌘[ and ⌘] step through it. At either end they do nothing.
- ⌥⌘[ lists it. The list opens on the place before this one, so Enter alone takes you back. Type to narrow it.
- The cursor goes back to the row it was on when you left.
A folder you only walk through is not kept. A folder counts as somewhere the pane has been when:
- you go to it by name: a place, a favorite, a typed path, a row of the history;
- the pane has been in it for five seconds;
- you do something there: mark or act on a row, run a command, switch panes.
So ⌘[ skips the folders in between and returns to the last one that counted. It always keeps the folder you press it in, however briefly you were there, so ⌘] returns to it.
A set of search results is in the list while the application runs, but is not kept for next time: only places that can be named again are.
Favorites
The folders you go to most, by name. The first nine have a number, and ⌘1 to ⌘9 take the active pane straight there.
- ⌘D keeps the folder the active pane is in, asking only for a name. On a folder already kept, it opens that favorite to edit instead, so one folder never has two numbers.
- ⌘\ lists them. Press it again for the form.
- The form — also Edit favorites… under Favorites in the Go menu — adds, edits, removes and moves them. Moving one up or down changes its number. Every change is kept as you make it.
- Editing one in the form can give it a keyboard shortcut of its own: Set… beside Keyboard shortcut. It stays with the favorite when it moves, and works past the ninth. Its row in the favorites menu shows it.
- A favorite can lead anywhere, even to a disk that is not plugged in today. Nothing is checked until you go there.
- Removing a favorite never touches the folder.
The nine keys
| Key | Action |
|---|---|
| ⌘1 | Favorite 1 |
| ⌘2 | Favorite 2 |
| ⌘3 | Favorite 3 |
| ⌘4 | Favorite 4 |
| ⌘5 | Favorite 5 |
| ⌘6 | Favorite 6 |
| ⌘7 | Favorite 7 |
| ⌘8 | Favorite 8 |
| ⌘9 | Favorite 9 |
Editing the file by hand
Favorites are in ~/.northern-commander/favourites.json, read again every time the list is shown or
a number is pressed, so a change made in the file counts at once. If the file holds something this
version cannot read, or is not JSON at all, the form refuses to save and says why, rather than lose it.
A file that is not JSON is moved beside itself as favourites.unreadable-<date>-<time>.json the next
time the application starts, and it tells you where.
Disks
All volumes in the places list — or Volumes in the left pane and Volumes in the right pane under Show here in the Left and Right menus — lists the disks themselves, with their format, capacity and free space.
- Enter goes onto the disk, in the same pane.
- F8 ejects the marked disks, or the one under the cursor. The disk the Mac started from never offers it.
- The list follows disks as they come and go.
- A pane standing on a disk that goes away stays there, and says it cannot be read.
- A volume on an external disk that is not mounted is listed faintly, as not mounted, and Enter mounts it.
Ejecting from anywhere
⌥⌘E lists every disk that can be ejected, from wherever you are: choose one, or tick several with the space bar.
If the system refuses because something has the disk open, you are told what, as far as the system shows it. You can show those processes in the other pane, where F8 quits one, or try again.
Show programs using this, in the Info submenu of the Files menu, asks the same of any file, folder or disk, and lists the processes in the other pane. For a folder that means anything inside it.
Formatting a volume
⇧F8 erases one volume on an external disk and gives it a format and a name. You type the volume’s name to confirm, and other volumes on the disk stay as they are.
- An APFS volume can only stay APFS. To change that, erase the whole disk in Disk Utility.
- It refuses while a program has files open on the volume.
- It is never offered for the Mac’s internal disk.
A disk image as a volume
To use a disk image file as a volume, choose Mount disk image on its row: it is mounted as Finder would, stays mounted until it is ejected, and the pane stays where it is. New disk image…, in the New submenu of the Files menu, makes an empty one in the folder the pane is in and mounts it. By default the file grows as you fill it; Full size now takes the whole size on the disk at once, so that space is reserved for it. Both are also found by name in the list of every action.
Two folders together
⌃S ties the two panes together, for walking two trees that are alike — a folder and its backup, two versions of a project. It is Commands › Compare › Sync browsing in the menu bar too. Nothing else changes in either pane: no blank lines and no colors, ever. To see what differs as you walk, use live compare, a mode of its own.
| Key | Action |
|---|---|
| ⌃S | Sync browsing |
The folders the panes are in when you switch it on are the two tops. From then on each pane is its top plus wherever you have gone under the other one:
- Going into a folder goes into the folder of the same name on the other side.
- Going up goes up on both, down to the two tops.
- ⌘[, ⌘] and a jump — a place, a favorite, a typed path — are followed too, while they land under the top.
- Whichever pane you move leads. Tab to the other pane and it is the one followed.
A yellow sign on the line between the panes, several rows tall, with arrows pointing both ways, says they are tied. It sits on the frames and covers nothing in either pane.
What unties them, each with a notice saying so:
- ⌃S again, or ⌃⇧S again when that is what is in force.
- Going above either top, or jumping somewhere outside it. The other pane stays where it was.
- Showing something else in a pane’s place: the tree, the info pane, the preview pane, the terminal.
- A pane going to something that is not a folder: the Trash, the disks, search results.
They are never tied when the application starts.
A folder only one side has
The other pane goes to the same path anyway. It is empty, and says the folder does not exist on this side, with a Create it button.
- Tab to that pane and press Enter, or click the button, to create the folder, with any folders missing above it.
- Copying or moving into that pane creates it too. The F5 and F6 dialog names it as usual.
- A folder that turns up there by other means is listed as soon as it is there.
- Where the name is a file on that side, the pane says so and there is nothing to create.
- Where the folder would be on a drive that is not connected, the pane says that instead, and nothing can be created or copied there until the drive is back.
Going back up to a folder both sides have lists it again. A folder that is not there is never in the pane’s history, and is not where the pane opens next time.
The cursor follows too
Move to a row and the other pane’s cursor goes to the row of the same name. Where the other side has no such name, its cursor stays where it is. The other cursor follows turns this off, and so does The other cursor follows in F10 while the panes are tied. It applies to live compare too.
Names are matched the way each disk matches them, so on a disk that ignores case Notes and notes
are one name. A link is a folder of its own name on each side: where it leads is never looked up.
Live compare
⌃⇧S is the other way to walk two folders together: the panes go together as in sync browsing, and the two folders are compared at every step, so what is different is in front of you. It is a mode of its own and has no setting; the sign on the line between the panes is the same one, in magenta in place of yellow, and says they are being compared.
| Key | Action |
|---|---|
| ⌃⇧S | Live compare |
Starting it puts both panes in the full view — the one view the rows line up in — and gives the other pane the order, direction, hidden files and filter of the pane you are in, so the rows line up at once. Marks on the other pane that its new filter or hidden files hide are dropped, and the notice says how many. The rows line up in any order by name; in an order by size or date they line up only while no two differing files change places between the sides. When they do not, a notice says so, and says it again each time you switch to an order they cannot line up in.
The two panes stay in one order: change the order or its direction in either pane and the other changes with it, so the rows stay lined up. Where they cannot line up for another reason, such as a view other than the full one, a notice says why. The other pane keeps what it was given when the panes are let go.
The two keys do not combine. Pressed while the other is in force, ⌃S and ⌃⇧S each turn the panes to their own mode without letting them go; pressed in its own, each lets them go.
| A row shown in | Is |
|---|---|
| Green | Only in this pane: the other side has nothing of that name. |
| Magenta | In both, and different: two files whose sizes or dates differ, or a file on one side and a folder on the other. |
- Nothing is opened to compare, so it is instant in a folder of any size. Two files of one name are the same when their sizes and dates are.
- A folder on both sides is left alone. Go into it and it is compared in its turn.
- Nothing is marked. The colors only show; your marks stay exactly as you made them, and a marked row is yellow as ever. With the cursor on a row, the line under the list says which it is.
- It follows the folders. A file that changes or turns up is recolored when the pane reads it.
- Both panes have to show the same files: the same filter, and hidden files in both or neither. Otherwise nothing is compared, and a notice says so.
With both panes in the full view, the rows line up. A name both sides have is on one line, and where a side has nothing there is a blank line. The two cursors are always on the same line, and the two lists scroll together.
The cursor can rest on a blank line. There the keys are about the file in the other pane, the one the line stands for, and the line under the list names it:
| On a blank line | |
|---|---|
| F5 | Copies the other pane’s file into this pane, filling the gap. The dialog says where it comes from. |
| F8 | Deletes the other pane’s file, to the Trash. The dialog gives its full path, and Enter does not confirm it: choose Delete. |
| Anything else about a row | Does nothing, marked rows or not. Move to a row to act on your marks. |
In another view there are no blank lines: the colors say what differs, and the cursor follows by name. The same goes for an order by size or date in a folder where files that differ have changed places, since no one line could hold both. Rows are never lined up inside the Trash.
The folder tree
⌃T turns the other pane into a tree of folders: the folder it starts at on the top line, and under each open folder the folders in it. Move through it and your pane lists whichever folder the cursor rests on. The pane it covers is under it as you left it, and the tree stays for as long as you want it.
- Enter keeps where the tree led. Your pane lists the folder under the tree’s cursor, the tree closes, and the pane it covered is back exactly as it was.
- Esc puts it back. The tree closes and your pane returns to the folder it was in before the tree took it anywhere, with the cursor on the same row and nothing added to its history. While a name is being typed or folders are being counted, Esc ends that first.
- ⌃T again closes it and leaves your pane where it is.
- ⌥→ opens it at a folder. From a pane it opens the tree starting at the folder
under the cursor — or at the folder the pane is in, when the cursor is on a file or on
..— and it is in the folder’s ⌘Enter menu too.
Tree is also in the ⌘F1 menu, which opens with what this side shows.
| Key | In the tree |
|---|---|
| ↑ ↓ PgUp PgDn Home End | Move the cursor |
| → | Open the folder, or step into it once it is open |
| ← | Close the folder, or step out to the one it is in |
| * | Open everything under the folder |
| Letters | Jump to the next folder whose name starts that way |
| Enter | Go to the folder: the pane lists it and the tree closes |
| Esc | Close the tree and put the pane back where it was |
| Space, ⇧↑ ⇧↓ | Mark the folder, or unmark it, and step on |
| - | Unmark every folder |
| ⌥→ | Start the tree at the folder under the cursor |
| ⌥← | Start the tree one level higher |
- The pane follows once the cursor rests, so holding an arrow down lists nothing on the way. Following is an option of the tree: Options… in the ⌘F1 menu, while the keyboard is on the tree. Turn it off and the pane stays where it is until Enter sends it. It is kept for each side, so a tree on the left and one on the right each have their own.
- A short yellow rung joins the two frames while the pane follows, at the top of the line between them.
- The tree follows the pane. It opens on the folder the pane is in, and when the pane goes somewhere by itself — its own keys, a place, ⌘[ — the cursor in the tree goes with it.
- Moving through the tree does not fill the pane’s history. A folder the cursor rests on is kept only once the pane has been there five seconds, or at once with Enter or Tab. Esc takes out every folder the tree passed through.
- The tree has the keyboard when it opens. Tab moves between it and the pane; the lit title and the cursor bar say which has it.
- A folder is read when you open it. A sign before a name means it can be opened; a folder already read that holds no folders has none. A folder that cannot be read says why on the line under it.
- The keys that act on a folder act on the one under the tree’s cursor: F5, F6, F2, F8, ⌘I, ⌘C, ⌥⌘C, and ⌘Enter for the rest. Each asks as it does in a pane. F5 and F6 ask where to with nothing filled in, since your pane is in that same folder.
- F7 makes a folder inside the one under the cursor. ⌘F, ⌘V and ⇧F7 go to that folder too. The keys that act on a file do nothing while the keyboard is in the tree.
- The folder at the top is not renamed, moved or deleted from the tree.
- Mark folders at any depth and the same keys act on all of them. The mouse marks as it does in a pane: ⌘-click one folder, ⇧-click from the cursor to a folder, or sweep with the right button. The line under the tree says how many are marked.
- A mark covers everything in the folder. Marking a folder unmarks any folder marked inside it. A folder inside a marked one cannot be marked: a notice says which folder above already covers it.
- Closing a folder keeps its marked folders showing, with the folders on the way down to them, and says how many folders are not shown. Unmark one and its line stays until the folder is opened or closed again.
- It starts at your home folder when your pane is in it or under it, and at the top of the disk anywhere else. The title says where, from the disk down. When the pane goes somewhere the tree does not hold, the tree starts again the same way.
- ⌥→ starts it at the folder under the cursor, and ⌥← one level higher. What was open, and marked folders still in the tree, stay as they were.
- A place chosen for the tree’s side — ⌥F1, ⌥F2 — is where the tree starts, and the pane goes there. While the pane lists the disks or the results of a search there is no tree.
- Hidden folders are shown when hidden files are — ⇧⌘..
- Opening everything stops after 200 folders, and does not go through a link.
- It keeps up with folders made, renamed and removed, by the application or anything else.
- It comes back after a restart, on the folder the pane is in, with the keyboard in the pane.
What takes the space
The tree has two views, Plain and Usage. While the keyboard is on the tree, ⌘F1 and F10 offer those in place of the pane’s.
- In Usage every folder showing is measured, one after another, and its line says what it
comes to, its share of everything the tree holds, and a bar as long as that share. A folder still
waiting shows
…. - The folders in a folder are largest first, and each moves into place as its size arrives. The cursor stays on its folder.
- Total, under the tree, is what it all comes to, with a
>before it while something is still to be counted or could not all be read. Hidden folders are counted whether or not they are shown. - Sizes, in F10, says which size each line is: the length, what is on disk or what deleting the folder would free — the three sizes. It is the size the pane beside the tree sorts its usage view by, so both sides say the same one.
- A link is not counted. Its line is gray and says ►SYMLINK◄; it does not open, and it is listed last.
- Another disk mounted inside a folder is not measured. Its line says ►MOUNTED◄, and it counts in nothing above it.
- Opening a measured folder shows what is in it at once. ⌥→ starts the tree at a folder, and the shares are then of that folder.
- Esc stops the counting. Choosing Usage again starts it again, and Compute size, from the folder’s menu, counts one folder afresh.
- Clean up disk space sets it up in one go: the tree in Usage on one side and your pane in its usage view on the other. Move through the tree and the pane lists that folder, largest first; F8 something there and the sizes in the tree change with it. It has no key: it is Clean up disk space in the Commands menu and in the list of every action. Nothing is put back afterwards — choose Plain in the tree, and the pane’s view in the pane.
- A tree left in Usage comes back plain, so nothing is counted as the application starts.
With the tree showing, the other pane’s place is taken, so the info pane and the preview pane are not shown at the same time: each of the three keys takes the place from the others.
Where each pane starts
Each pane opens where you left it. Left pane starts in and Right pane starts in can say otherwise:
| Setting | The pane opens |
|---|---|
last session |
Where you left it — the default |
home |
In your home folder |
A folder, such as ~/Projects |
In that folder |
A folder given when the application is started wins over both. A folder that is not there any more opens at home instead.