Northern Commander

Panes

Two panes side by side, each listing one folder. The active pane is the one every key acts on; the other is where copies and moves go.

The left pane is active: its title is lit and the cursor bar is in it.
Title
Where the pane is. It is lit on the active pane.
Column headings
The arrow marks the order the pane is sorted in. Click one to sort by it.
Cursor
The row keys act on, unless rows are marked. The other pane marks the row it is on with a slightly lighter bar, so it is plain which row a command that uses both panes will take.
Line under the list
The cursor’s row: its name in full first, then its size rounded, to the byte, and its date and time, as many of them as there is room for. While rows are marked, how many there are and their total size.
Command line
A shell line, always in the active pane’s folder — see the terminal.
Key bar
What each function key does right now. Hold ⇧, ⌥ or ⌘ and it shows what each key does with that held.

At a glance

KeyAction
EnterOpen
⌘↑Up one level
TabSwitch panes
⌘[Back
⌥F1Places for the left pane
⌘GGo to folder…
⌘F1View…
⌘F2Sort…
⇧⌘.Show or hide hidden files
⇧⌘EnterFull width

Moving around

The arrow keys, Page Up, Page Down, Home and End move the cursor. Enter goes into a folder; ⌘↑ comes back out, onto the folder you left.

A folder on a sleeping disk or a slow share says so on the line under the list, while the pane still shows the folder it was in. Everything keeps working meanwhile, and Esc cancels the move.

Going in and coming back out: the cursor lands on the folder you came from.

⌥⌘→ shows the folder under the cursor in the other pane and leaves the keyboard in this one, so you can look inside without leaving. On a file it shows the folder the file is in, with the other pane’s cursor on the file. If the other pane is showing the Tree, Info or Preview, it switches back to a file list first. In an archive or in search results, the other pane shows what pressing Enter on that item would open.

Each pane remembers where it has been: ⌘[ and ⌘] step through it, and Going places has the rest — the places list, favorites, typing a path. From any terminal, ncmd ~/work shows a folder in the active pane, and ncmd notes.txt the folder a file is in with the cursor on it — see Command line.

Type to find a name

In a long listing, start typing. The cursor jumps to the first name that begins with what you typed.

Each letter narrows it. Esc stops, leaving the cursor where it got to.
  • Tab switches between names that begin with what you typed and names that contain it.
  • A * or ? makes it a pattern; delete it and you are back to the kind you chose.
  • ↑ and ↓ go to the previous and next match, round from the ends.
  • ⌘= marks every name found, folders included, and ⌘- unmarks them — often the quickest way to mark a set.
  • Esc, or any key it does not use, stops searching. That key then does what it always does.

What Enter does

Enter does what the row is for, as the file type says:

On Enter
A folder Goes into it
.., the first row Goes up
A picture, a film or a sound Shows it in the viewer
An application Asks, in a small menu that opens on Look inside with Launch under it. ⌘O launches it at once and ⌘↓ goes into it, as into any folder
An archive — zip, rar, tar, 7z… Goes inside it, as into a folder. A kind that is not supported yet, such as an .arj, says so; Open with… hands it to Archive Utility
A .dmg disk image Goes inside it, as into a folder, read-only and mounted out of sight
Another disk image — .sparseimage, .xip Hands it to macOS
A Finder alias Opens what it leads to. An alias to an app asks, as the app does, and ⌘O launches it; an alias that leads nowhere says so
Any other file Whatever its type says. Most go to the app macOS would use; a script or a program asks what to do rather than running, unless its kind is set to Run

Open acts on the cursor’s row only, never on marked rows, so one key never starts fifty things. To look at a file or change it instead, F3 and F4 — see the viewer and the editor.

A file that could not be handed to an application says why on a notice: no application opens files like it, the file or the application is not there any more, or the system refused access to it.

Two panes together

KeyAction
TabSwitch panes
⌘USwap the panes
⇧⌘EnterFull width
⌃LInfo in the other pane
⌃QPreview in the other pane
⌃TTree in the other pane
⌥F3Compare files…
  • Switch makes the other pane active. With the terminal beside a pane, it moves between the two.
  • Swap puts the panes on each other’s side. Everything goes with each one: where it is, its marks, its view and order, its history.
  • Full width gives the active pane the whole window. The other is only out of sight — Tab shows it in its place, and copies and moves still go to it. The same key shares the width again. A restart always comes back sharing it.
  • Info turns the other pane into a description of the row under the cursor — the info pane.
  • Preview turns it into a view of the file under the cursor — the preview pane.
  • Tree turns it into a tree of folders that takes your pane to the one its cursor is on — the folder tree.
  • Compare files shows what the file under the cursor has that a file in the other pane does not: Comparing two files.

How the width is shared is Left pane's width — the left pane can have a quarter, a third, half, two thirds or three quarters. Neither pane is made narrower than 20 columns.

Tabs

Each pane can hold several folders as tabs and shows one of them. The keys are the terminal’s tab keys, meaning the same in a pane.

KeyAction
⌘TNew tab
⌘WClose tab
⇧⌘[Previous tab
⇧⌘]Next tab
⇧⌘TTabs…
Name tab…Name tab…
  • ⌘T opens a tab beside the one you are on, on the same folder, with the cursor on the same row and the same view and order. Marks stay with the tab they were made in.
  • From the second tab on, a row along the top of the pane names each tab, the one shown lit. It takes one line from the list. The other pane gets a row too, with its one tab, so the two lists stay level; both rows go when each pane is down to one tab. Click a name to show that tab.
  • Each tab keeps its own place — folder, cursor, marks, view, order and history — so ⌘[ and the history are that tab’s.
  • ⌘W shows the tab after it, or the one before it at the end. The last tab stays: a pane always shows a folder.
  • ⇧⌘T lists each command with its key, then every tab, reached by its number. ⌘1 to ⌘9 are still your favorites.
  • Name tab…, in the list and the Tabs submenu of the Left and Right menus, gives the tab shown a name of its own, for two tabs on folders with the same name. It stays when the tab goes to another folder and after a restart; leave it empty to show the folder’s name again. A new tab opened from a named tab shows its folder’s name, not the name you gave.
  • Tab goes to whichever tab the other pane is showing, and ⌘U takes each pane’s tabs with it.
  • The tabs are kept for next time, each where you left it.

The mouse

Nothing needs it, but all of it works:

Do And
Click a row Moves the cursor there, and makes that pane active
Click a tab Shows that tab; a count at either end of the row lists them all
Double-click Opens it, as Enter does: a file the way its type says, a folder by going into it
⇧-click Marks every row from the cursor to the one clicked
⌘-click Marks or unmarks that row
Drag with the right button Marks the rows it passes over — or unmarks them, if it started on a marked row
Right-click without dragging Opens the context menu. On a row that is not marked, that row becomes the only one marked
Click a column heading Sorts the pane by that column; a second click on it reverses the order. See the order
Drag with the left button Carries the files — dropping them copies or moves
Scroll Moves the list, not the cursor — as far as the wheel turns, a few rows a notch
Hold still on a name or a path with … in it Shows all of it in a box beside it. Moving off it, a key, a click or the wheel puts the box away

Folders you cannot open

Going into a folder you are not allowed to read leaves the pane where it was, and a notice says why. A pane that starts in one says why in the pane instead.

More about panes

  • Going places — the places list, typing a path, your folders, history, favorites, disks, two folders walked together, the folder tree, and where each pane starts.
  • What a pane shows — full, brief and thumbnail views, what takes the space, the order, hidden files, showing only some rows, and how sizes are written.
  • Finding out about a file — Get Info, the info pane, the preview pane, checksums, Quick Look and Reveal in Finder.
  • Marking — choosing the rows a copy, move or delete acts on.