Northern Commander

Finding out about a file

Everything the disk knows about a file, its checksums, the system’s own preview of it, and the file in Finder — each a key away. Get Info and Reveal take every marked row; the info pane, the preview pane and Quick Look are about the row under the cursor.

KeyAction
⌘IGet Info
⌃LInfo in the other pane
⌃QPreview in the other pane
⌘YQuick Look
⌥⌘RReveal
⌘EnterWhat can I do with this

Get Info

⌘I opens a panel of everything known about the rows it is asked about. What the disk answers at once is shown at once; a folder’s total size, and what a file’s format says about itself, fill in as they are worked out, without the panel changing size. Closing it stops them.

A path in it — Where, Came from, Links to — that is too long for its line is cut in the middle, so its start and its end both show: /private/tmp/…/scratchpad/site. Two small buttons stand beside it. ↕ writes the whole path over as many lines as it takes and the lines under it move down; pressing it again folds it. ❐ copies the whole path and says so in a notice. A path that fits has only the copy button. The path itself is a place the keyboard stops, as a field is: Tab and the arrows reach it, and so does the underlined letter of its label with ⌥. While the keyboard is on it, ⌘ C copies it, → writes it whole and ← folds it.

Every other panel that names a path shows it the same way: where Save as and Paste as a file will write, the folder Find files and Spotlight looked in, Kept in on Save search, Settings and Logs in About, a process’s Executable and Working folder, and Path and From in a journal entry. Over a list of paths — search results, favorites, the files in the way of a copy — ⌘ C copies the whole path of the row the keyboard is on.

What it lists for one row
Kind
What it is — a file, a folder, a link, a disk.
Where
The folder it is in.
Came from, Was named, Trash on
For something in the Trash: the folder it came from, the name it had there where macOS changed it, and the disk whose Trash holds it.
Shown by
Which of the application’s viewers would show it.
Links to
For a link, what it points to.
Format, Capacity, Free
For a disk.
Size, On disk, Private, Target
Its length in bytes and, from a kilobyte up, rounded both ways it is counted — in thousands, as the panes count, and in 1024s: 12,884,901,888 bytes (12.88 GB, 12.00 GiB). On disk is the room it takes on the disk, much less than its length for a sparse file. Private is what deleting it alone would free: a clone shares its room with the file it was copied from, so it frees nothing until one of them changes, and a file with a second name frees nothing until both are gone. A disk that keeps no such figure says so. For a folder all three are totals of the files in it, and a file with several names takes its room once, wherever its names are inside; its Private is at least what deleting it would free, since a file and its clone both inside it free their room together and that is not added. For a link the one size is Target, the length of what it leads to; for a link to a folder, the sizes are of that folder. A figure too long for its line leaves out the one in 1024s; the bytes are always there in full.
Downloaded
For a folder synced with a cloud service that has files not downloaded yet: how many of its files are on this Mac, and what they come to — 1,204 of 3,400 files, 3.02 GB. Those files still count toward Size, and take nothing in On disk.
Contains
For a folder, how many items are directly inside it. In the info pane, once the folder has been counted, how many files and folders are inside it in all.
Matching
In a filtered pane, how much of a folder the filter matches, beside its true total.
Created, Modified, Accessed
When each happened.
Access
Who may read, write and run it, as rwxr-xr-x. ⌃A changes it.
Flags
Hidden, read-only.
Owner
Its owner and group.
Opens with
The app macOS would open it in. In the info pane, what each key does with the file: a line each for F3, ⇧F3, F4, ⇧F4 and Enter, and the app under them.
Tags
Its Finder tags.
Attributes
The names of its extended attributes — not their contents.

With several rows marked it counts them instead: files, folders and their total size, saying how many folders are not counted yet.

The info pane

⌃L turns the other pane into a description of the row under the cursor, and it follows the cursor as you move. Press it again to get the pane back as you left it. It is also Info in the ⌘F1 menu, under what this side shows.

  • It says what Get Info says: kind, where, size, dates, access, owner, what opens it, tags and attributes. A folder says how many items are directly inside it, and its size only once something has counted it — moving the cursor never starts a count.
  • A path too long for its line is cut in the middle, so its start and its end show, and Where, Came from and Links to have the same two buttons as in Get Info when the pane is wide enough: ↕ shows the whole path over as many lines as it needs, ❐ copies it. They are for the mouse; moving the cursor to another row folds the path again. As the pane narrows ↕ goes first, then Move… beside Where, then ❐.
  • The volume the row is on is underneath: its name, format, capacity, free space, and a bar of how full it is. A row that is itself a disk says that at the top instead.
  • Every line is in its place as the cursor lands. What the listing already knows is there at once, and the rest is written beside its label a moment later. Nothing moves as it fills in; a line with nothing to say shows a dash.
  • The keyboard stays in your pane until you press Tab, which puts it on the info pane. The row it describes keeps a pale bar in the listing. Tab again, or Esc, gives the keyboard back; ⌘U takes the description across with the panes.
  • With the keyboard there, it is a short list of things to do, each in brackets straight after the value it is about. ↑ and ↓ move between them and Enter does the lit one; a click does one from anywhere. On a folder the keyboard starts on Count.
    • Count, beside a folder’s size, adds up everything in the folder, and the listing shows that size from then on. The lines under it then say what it takes on disk, what deleting it would free, and how many files and folders are inside in all. Esc stops it, and so does moving the cursor to another row.
    • Move…, beside where the row is, opens the move dialog for that row alone, with nowhere filled in.
    • Change dates…, beside Modified and Accessed, opens the dates dialog for that row alone.
    • Change permissions, beside the access, opens the permissions dialog for that row alone. In a narrow pane it reads Change….
    • Change…, beside Opens with, opens File types on the kind this file is.
  • On .., and in an empty folder, it describes the folder you are in.
  • It comes back after a restart, beside the pane that was active.

Picking a place for the covered pane — ⌥F1, ⌥F2 — gives that pane its side back and sends it there.

The preview pane

⌃Q turns the other pane into a view of the file under the cursor, and it follows the cursor as you move: flip down a folder of photos and each one is shown as you reach it. Press it again to get the pane back. It is also Preview in the ⌘F1 menu, under what this side shows.

  • A file is shown the way F3 would show it, in the view made for its kind — a picture, a table, a document, a PDF’s first page — and otherwise as text, colored by its language. Its name and size are above it, and what it says about itself below.
  • Nothing plays by itself. A film shows its first frame and a recording its waveform, waiting at the start until you play it there, or open it with F3.
  • Long lines of text are cut at the pane’s edge, or wrapped: Wrap the long lines, on this side of the view options, for as long as the preview is up.
  • A web page is shown as its source, so nothing in it runs because the cursor passed.
  • A file that is neither text nor anything with a view of its own is shown as hex, from its first byte.
  • A folder or a disk is described, as the info pane describes it.
  • Nothing jumps as you move. A file’s name, the file and the line under it keep their places; the file before stays until the next is ready, and a slow one says Reading… where it will be.
  • What is marked as sensitive is not shown — a password copied from a password manager, on the clipboard. F3 still shows it, after asking.
  • The mouse works on it as it does in the viewer, wherever the keyboard is: click a film or a recording to play and pause it, click or drag along a recording’s waveform to move through it, drag a picture you have made larger with the wheel, scroll text and tables. A click there does not move your cursor or take the keyboard.
  • The keyboard stays in your pane until you press Tab, which puts it on the preview. The row it shows keeps a pale bar in the listing. Tab again, or Esc, gives the keyboard back; ⌘U takes the preview across with the panes.
  • With the keyboard there, the file has the keys it has in the viewer, and the bar along the bottom names the ones on the function keys: Space plays and pauses and ← → seek, + and - zoom a picture and the arrows move it, a table or a tree moves its own cursor. Text scrolls with ↑ ↓, Page Up Page Down, Home and End within the start of the file, which is all that is read here; searching it is the viewer’s. A folder offers Count and Change… as the info pane does.
  • Moving the cursor to another row stops what is playing. F3 opens the file over the whole window as ever.
  • ⌃L switches to the description, and ⌃Q back. ⌃T puts the folder tree there instead.
  • It comes back after a restart, beside the pane that was active.

Checksums

For a single file, Checksums… in Get Info reads it once and works out its MD5, SHA-1, SHA-256 and SHA-512 together.

  • Paste the checksum the file is meant to have into Paste checksum to compare. It says Match and which one matched, or No match — capitals and spaces do not count.
  • Copy copies the one chosen with the arrow keys, once it is worked out.
  • Closing it stops the reading. A folder has no checksum, and neither has a pipe, a socket or a device: it is never opened, and the rows say why.

Quick Look and Reveal

  • ⌘Y is macOS’s own preview, of the cursor’s row whatever is marked.
  • It stays up while you move and mark, so a folder can be walked, looked at and marked in one pass. The arrows, in every view, and typing a name bring it to another row; Enter on a folder, ⌘↑, ⌘[ and ⌘] keep it, on the row the cursor lands on. Space marks the row, as it does without the preview.
  • The same key puts it away, and so does Esc once a search or anything else open has taken its own. So does going to the other pane, opening a menu or a dialog, or sending the pane somewhere else: a place, a favorite, a typed path, a folder from the history.
  • ⌥⌘R shows each marked row, or the cursor’s, in Finder.
  • Where either cannot be done, a notice says why: the item is not there any more, the system refused access to it, or it could not be shown.

Sharing

Share… gives each marked row, or the cursor’s, to the system’s share sheet: AirDrop, Mail, Messages and whatever else the Mac offers. Folders can go too. It is in the Files menu under Info, on a row’s menu, and in the list of actions. Files inside an archive cannot be shared until they are extracted.

  • A link is listed, sorted and opened as whatever it points to. Get Info’s Links to says what that is.
  • A link’s row is gray, and shows what it leads to with → before the size. It has no size of its own and is counted in no total.
  • An app is a folder to the disk, so it is listed like one — and Enter asks whether to look inside it or launch it. ⌘O launches it and ⌘↓ goes in. Other packages, such as a .framework, are folders here: Enter goes in.

What can I do with this

⌘Enter lists what can be done with the row under the cursor, or the marked rows: first what Open, View and Edit would each do to it, then everything else that applies, each with its key. With several rows marked its title says how many, and the first part is left out, since those three act on the cursor’s row alone. ⌘K lists everything the application can do, by name.